Dell 2355 Mono Laser User Manual page 81

Laser mfp
Hide thumbs Also See for 2355 Mono Laser:
Table of Contents

Advertisement

To achieve the best possible print quality, use only high-quality envelopes that are
designed for use in laser printers.
For best performance, use envelopes made from 75 g/m
up to 90 g/m
percent or less.
Use only new, undamaged envelopes.
For best performance and to minimize jams, do not use envelopes that:
Use envelopes that can withstand temperatures of 180° C (356° F) without sealing,
excessive curling, wrinkling, or releasing hazardous emissions. If you have any doubts
about the envelopes you are considering using, check with the envelope supplier.
Adjust the width guide to fit the width of the envelopes.
Load an envelope with the flap side down and with the stamp area on the top left side.
The end of the envelope with the stamp area enters the MPF first.
See "Using the MPF (Multi purpose feeder)" for instructions on loading an envelope.
80
2
(24 lb bond) weight for the MPF as long as the cotton content is 25
Have excessive curl or twist
Are stuck together or damaged in any way
Contain windows, holes, perforations, cutouts or embossing
Use metal clasps, string ties, or metal folding bars
Have an interlocking design
Have postage stamps attached
Have any exposed adhesive when the flap is in the sealed or closed position
Have nicked edges or bent corners
Have rough, cockle, or laid finishes
2
(20 lb bond) paper. You can use

Advertisement

Table of Contents
loading

This manual is also suitable for:

2355dn

Table of Contents