Table of Contents
Advertisement
Load the print material
3
Depending on the paper type you are using, keep the following loading method:
•
Envelopes: load them with the flap side down and with the stamp area on the top left
side.
•
Transparencies: load them with the print side up and the top with the adhesive strip
entering the printer first.
•
Labels: load them with the print size up and the top short edge entering the printer
first.
•
Preprinted paper: load with the design face up, top edge toward the printer.
•
Card stock: load them with the print side up and the short edge entering the printer
first.
•
Pre printed paper: the printed side should be facing down with an uncurled edge
toward the printer.
Squeeze the width guide and adjust it to the width of the print material. Do not force too
4
much, or the paper will be bent, which will result in a paper jam or skew.
with the side to be printed on facing up
.
91
Advertisement
Table of Contents
Troubleshooting
