Guidelines For Using Paper - Dell 2355 Mono Laser User Manual

NOTE:

Guidelines for Using Paper

For the best result, use conventional 75 g/m
quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or
bent edges.
If you are unsure of what type of paper you are loading, such as bond or recycled paper, check
the label on the package.
The following problems may cause print quality deviations, jamming or even damage to the
printer:
Symptom
Poor print quality or toner adhesion,
problems with feeding
Dropout, jamming, curl
Increased gray background
shading/printer wear
Excessive curl problems with
feeding
Jamming, damage to printer
Problems with feeding
NOTE:
types of thermography.
NOTE:
NOTE:
or preprinted forms use inks that are compatible with this fusing temperature (180° C or 356° F for
0.1 second).
314
You can use A4, Letter, Folio, Oficio, Legal-sized paper for duplex printing.
Do not use letterhead paper printed with low-temperature inks, such as those used in some
Do not use raised or embossed letterhead.
The printer uses heat and pressure to fuse toner to the paper. Ensure that any colored paper
2
(20 lb) paper. Ensure that the paper is of good
Problem with paper
Too moist, too rough, too
smooth or embossed; faulty
paper lot
Stored improperly
Too heavy
Too moist, wrong grain
direction or short-grain
construction
Cutouts or perforations
Ragged edges
Solution
Try another kind of paper,
between 100-400 Sheffield,
4%-5% moisture content.
Store paper flat in its
moisture-proof wrapping.
Use lighter paper, use the rear
door.
• Use the rear door.
• Use long-grain paper.
Do not use paper with cutouts
or perforations.
Use good quality paper.