Dell 2355 Mono Laser User Manual page 281

Display message
Check
Cartridge Area
Fuser Door Open
Rear Cover is open
Scanner lock is engaged,
unlock it
Scan Job is completed
with error :
File Existed
Scan Job is completed
with error :
Filename is too long
Scan Job is completed
with error :
File Access Denied
Self
Diagnostic...
Please wait
SMPS Error
Standard Bin Full
Toner Cartridge is not
installed
Toner Supply Error
Toner Cartridge Error
280
Meaning
Paper has jammed in the fuser area.
The fuser door is not securely latched.
The rear door was opened.
The scanner module is locked.
The same named file is already exist.
All file names are used already.
Login to the network server was successful.
However, access to the file on the network
server was denied.
The engine in your printer is checking some
problems.
A problem has occurred in the SMPS unit.
The document output tray is full.
The toner cartridge is not installed.
Toner did not supply enough.
Toner cartridge error.
Suggested solutions
Clear the jam.
See "Fuser Area Jam".
Open the rear door and close the fuser door
until it locks into place. For the location of
the fuser door, see "Paper Exit Jam".
Close the rear door.
Unlock the scanner.
Enter a different file name.
Delete unnecessary files.
Change the server settings.
Please wait a few minutes.
Unplug the power cord and plug it back. If
the problem persists, please call for service.
The document output tray can hold up to
150 sheets of plain paper. Once the paper is
removed from the document output tray, the
printer resumes printing.
Install the toner cartridge. See "Installing the
Toner Cartridge".
The front cover is not securely latched.
Close the cover until it locks into place.
The front cover is not securely latched.
Close the cover until it locks into place.