Table of Contents
Advertisement
Precautions When Installing Printer Accessories
Never remove the control board while the printer is plugged in.
To avoid the possibility of an electrical shock, always disconnect the power cord when
installing or removing ANY internal or external printer option.
The control board and internal printer memory are sensitive to static electricity. Before
installing or removing an internal printer memory, discharge static electricity from your body
by touching something metal on any device plugged into a grounded power source. If you walk
around before finishing installation, discharge any static electricity once again.
Installing Printer Memory
Additional printer memory is provided on a Dual In-line Memory Module (DIMM).
Your printer has 256 MB of memory. Additional 256 MB can be installed. Do not remove
preinstalled memory. Just add one more DIMM in the DIMM socket.
Power the printer off and unplug all cables from the printer.
1
Grasp the control board cover and open it.
2
Remove a new memory DIMM from its antistatic package.
3
Holding the memory module by the edges, align the memory module on the slot at about
4
a 30-degree tilt. Ensure that the notches of the module and the grooves on the slot fit
each other.
300
NOTE:
Your printer supports only Dell DIMMs. Order Dell DIMMs online at www.dell.com.
Advertisement
Table of Contents
Troubleshooting
