HP J6039C - JetDirect 200M Print Server User Manual page 62

External print server setup
If you use an internal print server, the print server is a module that plugs into a slot in the
printer. Many printers come with the print server module installed. If your print server module is
not already installed, plug it into its slot in the printer. Then connect the network cable directly to
the print server. Finally, print a configuration page to test the print server connection. (For
detailed instructions, check your print server manual or setup poster.) The connections should
look like this:
Internal print server setup
If your network wiring is hidden -- In many network installations, the network components
(hubs, switches, &c.) are stored in a wiring closet and the network wiring is hidden in the walls.
The only sign of the network that you see in such an installation is a wall outlet that has one or two
network connectors. In this case, just use network cables to plug the computer and the print server
into the wall outlets. (If you have any questions about such an installation, check with your
network administrator.) The connections will look generally like the following illustration.
Connections to wall outlets
Note that in the drawings above we have omitted the power cords to keep things simple.
3. Get the right printer driver. You can get the driver from:
the CD-ROM that came with the printer (this is quick, if you have the CD), or