HP J6039C - JetDirect 200M Print Server User Manual page 179

Table 9.12 Error Messages (8 of 10)
Error Code and
Message
42 INVALID IP
ADDRESS
43 INVALID SUBNET
MASK
44 INVALID GATEWAY
ADDRESS
45 INVALID SYSLOG
ADDRESS
46 INVALID SERVER
ADDRESS
47 INVALID TRAP
DEST ADDRESS
48 CF ERR - FILE
INCOMPLETE
49 CF ERR - LINE TOO
LONG
4A CF ERR -
UNKNOWN
KEYWORD
4B CF ERR - MISSING
PARAMETER
4C CF ERR - INVALID
PARAMETER
4D CF ERR - ACCESS
LIST EXCEEDED
4E CF ERR - TRAP
LIST EXCEEDED
4F TFTP REMOTE
ERROR
32 HP Jetdirect Configuration Page
Description
The IP address specified for the HP Jetdirect print server
(through BOOTP) is an invalid IP address for specifying a
single node. Check your Bootptab file for proper entries.
The IP subnet mask specified for the HP Jetdirect print
server (through BOOTP) is an invalid subnet mask. Check
your Bootptab file for proper entries.
The default gateway IP address specified for the
HP Jetdirect print server (through BOOTP) is an invalid IP
address for specifying a single node. Check your Bootptab
file for proper entries.
The syslog server IP address specified for the HP Jetdirect
print server (through BOOTP) is an invalid IP address for
specifying a single node. Check your Bootptab file for proper
entries.
The TFTP server IP address specified for the HP Jetdirect
print server (through BOOTP) is an invalid IP address for
specifying a single node. Check your Bootptab file for proper
entries.
One of the SNMP trap (Trap PDU) destination IP addresses
specified for the HP Jetdirect print server (through TFTP) is
an invalid IP address for specifying a single node. Check
your TFTP configuration file.
The TFTP configuration file contained an incomplete last
line that did not end in a newline character.
A line being processed in the TFTP configuration file was
longer than the HP Jetdirect print server could accept.
A TFTP configuration file line contained an unknown
keyword.
A line in the TFTP configuration file was missing a required
parameter.
A line in the TFTP configuration file contained an invalid
value for one of the parameters on that line.
The TFTP configuration file specified too many access list
entries using the "allow:" keyword.
The TFTP configuration file specified too many trap
destination list entries using the "trap-destination:" keyword.
The TFTP transfer of the configuration file from the host to
the HP Jetdirect print server failed with the remote host
sending a TFTP ERROR packet to the print server.
ENWW