HP J6039C - JetDirect 200M Print Server User Manual page 117

Resetting the HP Jetdirect 200m or 250m print
server to factory defaults (cold reset)
Once you configure the HP print server, the configuration settings are retained in memory unless you
manually reset them to factory defaults.
To reset the print server configuration to factory defaults, follow these steps:
1. Make sure that the printer's power is on.
2. Unplug the print server from the printer.
3. While holding down the Test button on the print server, plug the print server back into the
printer; continue to hold down the Test button for about five seconds. Any user-configured
settings will be erased.