HP J6039C - JetDirect 200M Print Server User Manual page 174

Table 9.12 Error Messages (3 of 10)
Error Code and
Message
16 NOT CONFIGURED (Ethernet) The HP Jetdirect print server has not been
16 LAN ERROR -
AUTO REMOVAL
17 UNABLE TO FIND
SERVER
17 LAN ERROR -
REMOVE RECEIVE
18 PASSWORD
ERROR
19 NO QUEUE
ASSIGNED
1A PRINTER NUMBER
NOT DEFINED
ENWW
Description
configured for NetWare. Use the installation software,
embedded web server, or other tools to configure the print
server for NetWare networks.
(Token Ring) The HP Jetdirect print server detected an
internal hardware error following the Token Ring beacon
auto-removal process and has removed itself from the ring.
(Ethernet) The HP Jetdirect print server was unable to find
the NetWare print server (Remote Printer mode) or file
server (Queue Server mode). (There was no response to
service queries for advertising print servers or file servers
that matched the configured print server or file server
name.)
Make sure that the print server or file server is running and
that the print server or file server name configured on the
HP Jetdirect print server matches the actual name used by
the print server or file server. Also make sure that all cables
and routers are functioning correctly.
(Token Ring) The HP Jetdirect print server has received a
Remove Adapter data frame during the Token Ring insertion
process, or has received a remove ring station data frame
request, and has removed itself from the ring.
The HP Jetdirect print server detected that the password for
the NetWare print server object is wrong. Use a NetWare
utility (such as PCONSOLE) to erase the password for the
print server object. When the HP Jetdirect print server logs
on again, it sets a new password.
Note: When multiple file servers are configured, the error is
only displayed on the configuration page if none of the file
servers are connected.
The HP Jetdirect print server detected that the print server
object has not been assigned any queues to service. Assign
queues to the print server object using printer installation or
NetWare utilities.
Note: When multiple file servers are configured, the error is
only displayed on the configuration page if none of the file
servers were successfully connected.
A NetWare printer number for this printer has not been
configured. Assign a valid printer number to the HP Jetdirect
print server. Use a NetWare utility (such as PCONSOLE),
the Jetdirect embedded web server, or other tool to assign
a printer number.
HP Jetdirect Configuration Page 27