Split Mode; Two-Sided To One-Sided; Book To One-Sided - Kyocera KM-2540 Operation Manual

1
Original
1 2
Original
Ready to copy.
11×8½"
Plain
11×17"
Auto %
APS
Color
11×8½"
MP Tray
100%
Plain Plain
8½×11"
Plain
Zoom
Basic User choice Function
Ready to copy.
Paper Original
Duplex
Selection Size
Mixed Size
Density Zoom
Originals
Original Margin/
Page #
Image Centering
Collate/ Border
Cover
Offset Erase
Basic User choice Function
Basic Operation

Split Mode

Use Split mode to create single-sided copies from two-sided originals or
originals with facing pages (such as books or magazines) as follows.

Two-sided to One-sided

Copies each side of a two-sided original onto two individual sheets.
1 2
Copy
The following binding options are available.
•
•

Book to One-sided

Copies each page of originals with facing pages (such as books or
1 2
magazines) onto two individual sheets.
The following binding options are available.
•
Copy
•
Follow the steps as below to use Split mode.
1
P
Off
Auto Stap
Density Left
Density Stap
Program
2
Combine
Continuous
Scan
Booklet
Program
Note This operation requires the optional document processor.
Binding Left/Right: The back side and front side of the original are
copied with the same orientation.
Binding Top: The back side is copied rotated 180 ° from the
orientation of the front side.
Binding Left: Originals with facing pages are copied from left to right.
Binding Right: Originals with facing pages are copied from right to
left.
Note Original sizes for split mode copy mode are limited to
11 × 17", 8 1/2 × 11", A3, B4, A4R, B5R and 8K. Paper sizes are
limited to 11 × 8 1/2", A4, B5 and 16K. Change the paper size to fit
the original to that size.
Press [Function].
Press [Duplex].
3-13