Kyocera KM-2540 Operation Manual page 87

Error Messages
Check paper size. Copy paper is
not the same size as original.
(Paper size in cassette differs
from actual size.
Check paper size in cassette.)
Reposition original or change
cassette.
(Reset original or select another
paper cassette.)
Reset originals in processor.
Reset all originals in processor.
(Reset originals in processor.)
Reset all originals in Document
Processor.
(Reset originals in Document
Processor.)
Cannot copy this paper type.
Cannot staple this paper type.
Cannot staple this size.
(Cannot staple this paper size.)
Cannot staple.
## :maximum capacity (Staple)
(Cannot staple.
## :Max. staples)
The top tray is full of paper.
Remove paper, and press Start
key.
The top tray is full of paper.
Remove paper, and press
Continue key.
Paper capacity exceeded.
(Finisher)
Remove paper, and press Start
key.
Paper capacity exceeded.
(Finisher)
Remove paper, and press
Continue key.
Troubleshooting
Checkpoints
Is the specified paper loaded?
Or are the settings incorrect?
Is the orientation of the specified
paper different from that of the
original?
Is the copier installed beneath
fluorescent lights?
—
—
Are there any originals left in the
optional document processor?
Can the specified copy functions
be used with the selected media
type?
Did you select a media type that
cannot be stapled?
Is stapling available for the size
of the loaded paper?
Is the maximum page quantity
for stapling exceeded?
During copying, is the maximum
capacity of the top tray
exceeded?
During printing, is the maximum
capacity of the top tray
exceeded?
During copying, is the maximum
capacity of the optional
document finisher output tray
exceeded?
During printing, is the maximum
capacity of the optional
document finisher output tray
exceeded?
Corrective Actions
Load the specified paper. Adjust
any settings that are incorrect.
Change the orientation of the
original.
Do not install this machine
beneath fluorescent lights.
Remove originals from the
optional document processor,
stack them uniformly and reset
them.
Remove originals from the
optional document processor,
and reset them in the original
order.
Reset all originals in the optional
document processor.
Select another type of media.
Select another type of media.
Change the paper size.
Decrease the number of sheets
to be stapled to less than the
maximum staple sheet count.
Remove some pages from the
top tray and press the Start key.
Printing continues.
Remove some pages from the
top tray and press [Continue].
Printing continues.
Remove some pages from the
optional document finisher and
press the Start key. Printing
continues.
Remove some pages from the
optional document finisher and
press [Continue]. Printing
continues.
Reference Page
—
—
—
page 2-15
page 2-15
—
—
Refer to the
optional Document
Finisher Operation
Guide.
page 7-9
Refer to the
optional Document
Finisher Operation
Guide.
page 7-9
Refer to the
optional Document
Finisher Operation
Guide.
—
—
—
—
6-5