Kyocera KM-2540 Operation Manual page 79

Maintenance
9
10
A
11
12
13
Align the grid cleaner with the notch and attach it to the machine.
While gently holding the grid cleaner in place with your left hand, pull
the main charger out fully and then push it back to a position where
the roller A does not quite reach the white pad on the grid cleaner.
Repeat 2 or 3 times.
IMPORTANT When pushing the main charger back in, take care
not to push it all the way in. This could result in damage to copies.
With the main charger pulled out about 5 cm (2 inches), remove the
grid cleaner. Then push the main charger back in fully, applying
pressure in the direction shown by the arrow so that the main
charger is in its designated position.
Install a new waste toner box.
Remove cleaning brush (blue colored).
5-9