5-10
14
Pull up left cover 1 lever and open left cover 1.
15
Run the brush from side to side along the separator as shown to
remove any soiling.
16
Run the brush from side to side along the transfer roller as shown,
rotating by the gear at the end, to remove any soiling.
17
After cleaning, replace the cleaning brush and close left cover 1.
IMPORTANT Push in the position indicated to ensure that left
cover 1 is securely closed.
18
Push the toner container stopper to the right and pull out the old
toner container.
IMPORTANT Do not pull the toner container out completely as it
could drop onto the floor.
Maintenance