Cleaning; Original Cover, Document Processor And Platen; Slit Glass - Kyocera KM-2540 Operation Manual

Clean the slit glass for original fed from DP.
1.Open the document processor.
2.Clean the surface of the slit glass
located on the left side and the reading
guide on the document processor with
the supplied dry cloth.
3.Close the document processor.
4.Press [END].
If the slit glass is dirty, black line
will appear on the copy.
A
5-2

Cleaning

Clean the machine regularly to ensure optimum copy quality.
CAUTION For safety, always unplug the power cord before
cleaning the machine.

Original Cover, Document Processor and Platen

Wipe the rear side of the optional document processor or original cover
and the platen with a soft cloth dampened with alcohol or diluted mild
detergent.
IMPORTANT Do not use thinner or other organic solvents.
Original Cover (Document Processor)
Platen

Slit Glass

If black streaks or other soiling appears in copies when the optional
document processor is used, clean the slit glass and white guide with the
cleaning cloth provided. The message: Clean the slit glass for original
fed from DP (Clean the slit glass for original fed) may be displayed if the
slit glass requires cleaning. After cleaning, press [End].
IMPORTANT Lightly wipe the slit glass and white guide with a dry
cloth. To remove adhesive material or ink, apply alcohol to a cloth and
wipe lightly. Do not use water, thinner, or organic solvents.
1
Remove the cloth from the cleaning cloth compartment.
2
Open the document processor and wipe slit glass A.
Maintenance