Loading Envelopes - Kyocera KM-2540 Operation Manual

2-6

Loading Envelopes

Up to 20 envelopes may be loaded in the MP tray.
Acceptable envelope sizes are as follows.
Acceptable Envelope
Monarch
Comm. #10
Envelope DL
Envelope C5
Executive
Comm. #9
Comm. #6-3/4
ISO B5
Envelope C4
Oufuku Hagaki
Youkei 2
Youkei 4
1
Open the MP tray.
2
Adjust the paper width guides to the width of the envelope.
3
For landscape form envelopes, close the flap. Insert the envelope all
the way along the width guides, keeping the printing side face-up
and the flap closed.
For portrait form envelopes, open the flap. Insert the envelope all the
way along the width guides, keeping the printing side face-up and
the flap positioned opposite to the entrance.
IMPORTANT How envelopes are loaded (orientation and facing)
will differ depending on the type of envelope. Be sure to load them
correctly, otherwise they may be printed in the wrong direction or
on the wrong face.
Note When you load envelopes in the MP tray, select the
envelope type by referring to Specifying the Media Type for the
MP Tray on page 2-13.
Size
3 7/8 × 7 1/2"
4 1/8 × 9 1/2"
110 × 220 mm
162 × 229 mm
7 1/4 × 10 1/2"
3 7/8 × 8 7/8"
3 5/8 × 6 1/2"
176 × 250 mm
229 × 324 mm
148 × 200 mm
162 × 114 mm
234 × 105 mm
Preparation for Usage