Kyocera KM-2540 Operation Manual page 85

Symptom
Copies are skewed.
Paper jams frequently
occur.
Copies from the optional
document processor
have black lines.
Copies are wrinkled.
Troubleshooting
Checkpoints
Are the originals loaded correctly?
Is the paper loaded correctly?
Is the paper loaded correctly?
Is the paper of the supported type? Is it
in good condition?
Is the paper curled, folded, or
wrinkled?
Are there any loose scraps or jammed
paper in the machine?
Is the paper damp?
Is the slit glass dirty?
Is the separator dirty?
Is the paper damp?
Is the paper set in a proper orientation? Change the orientation in which the
Corrective Actions
When placing originals on the platen,
place them face-down and flush
against the original size indicator
plates.
When placing originals in the
document processor, align the original
width guides securely before placing
the originals.
Check the position of the paper width
guides.
Load the paper correctly.
Remove the paper from the cassette,
turn it over, and reload it.
Replace the paper with new paper.
Remove any jammed paper.
Replace the paper with new paper.
Clean the slit glass.
Clean the separator.
Replace the paper with new paper.
paper is positioned.
Reference
Page
page 2-14
page 2-15
page 2-2
page 2-2
page 2-2
page 2-2
page 6-8
page 2-2
page 5-2
page 5-3
page 2-2
—
6-3