Changing The Copy Default Settings - Kyocera KM-2530 Operation Manual

Touch the [Copy default] key in the "Default setting menu"
3
screen.
The "Enter the administrator number" screen will appear.
Inch specifications
Metric specifications
4 Enter the 4-digit management pin code "
the numeric keys. "2500" for Copiers with a copy speed
of 25 copies per minute, "3500" for Copiers with a copy
speed of 35 copies per minute or "4000" for Copiers with
a copy speed of 40 copies per minute is set at the ship-
ment.
The "Copy default" screen will appear.
Inch specifications
Metric specifications
NOTE
• The 4-digit management pin code can be changed. (See "Man-
agement code change" on page 6-21.)
5
Select the item and then perform the settings by follow-
ing "(3) Changing the default settings".

(6) Changing the copy default settings

•
Exposure mode
Specify which copy exposure mode you want to be automatically
selected each time the copier is turned on, the auto exposure
mode or the manual exposure mode.
1 Display the "Copy default" screen. (See (5) Accessing
the copy default setting mode.)
" with
Select "Exposure mode" in the setting item list at the
2
left-hand side of the screen, and then touch the [Change
#] key.
The "Exposure mode" screen will appear.
3
Select default mode of copy exposure, auto or manual.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the "Copy default" screen.
4 Touch the [Close] key.
The display will return to the "Copy default" screen.
5
Touch the [Close] key.
The display will return to the "Default setting menu"
screen.
CHAPTER 6 COPIER MANAGEMENT
Inch specifications
Metric specifications
Inch specifications
Metric specifications
6-25