Standard Zoom Mode; Xy Zoom Mode - Kyocera KM-2530 Operation Manual

CHAPTER 4 BASIC OPERATION

(3) Standard zoom mode

Enlargement/reduction copying is possible using the ratios pre-
set in the copier.
Available ratios in Inch specification
Reduction 25%
50% : 11" ✕ 17" –– > 5 1/2" ✕ 8 1/2"
64% : 11" ✕ 17" –– > 8 1/2" ✕ 11"
77% : 11" ✕ 17" –– > 8 1/2" ✕ 14"
78% : 8 1/2" ✕ 14" –– > 8 1/2" ✕ 11"
121% : 8 1/2" ✕ 14" –– > 11" ✕ 17"
Enlargement
129% : 8 1/2" ✕ 11" –– > 11" ✕ 17"
154% : 5 1/2" ✕ 8 1/2" –– > 8 1/2" ✕ 14"
200% : 5 1/2" ✕ 8 1/2" –– > 11" ✕ 17"
400%
Available ratios in Metric specification
Reduction 25%
50%
70% : A3 –– > A4, A4 –– > A5
75% : 11" ✕ 15"–– > A4
90% : Folio –– > A4
106% : 11" ✕ 15"–– > A3
Enlargement
127% : Folio –– > A3
141% : A4 –– > A3, A5 –– > A4
200% : A5 –– > A3
400%
1 Set the original(s).
Touch the [Reduce/Enlarge] key.
2
The "Reduce/Enlarge" screen will appear.
Inch specifications
Metric specifications
3 Touch the key corresponding to the desired zoom ratio.
NOTE
• The zoom ratio can be changed in increments of 1% from the
selected ratio by pressing the [+] key or [–] key.
4 Copying will start when the [Start] key is pressed.
4-6

(4) XY zoom mode

It is possible to set the zoom ratio for the length and the width of
the copy independently. The zoom ratio can be set to any 1%
increment between 25% and 400% (between 25% and 200%
when using the Document Processor).
M
1 Set the originals.
2
Touch the [Reduce/Enlarge] key.
The "Reduce/Enlarge" screen will appear.
Inch specifications
Metric specifications
3
Touch the [XY zoom] key.
The XY zoom mode set-up screen will appear.
Inch specifications
Metric specifications
M
Y %
X %