Making A Booklet (Sheet Originals) [Booklet Copy Mode] - Kyocera KM-2530 Operation Manual

CHAPTER 5 FUNCTIONS

8. Making a booklet (sheet originals) [Booklet copy mode]

This mode can be used to copy one-sided or two-sided originals
onto two-page [open-face], two-sided copies in such a way that
the finished copies can be stacked and folded into a booklet for-
mat.
IMPORTANT
(Inch specifications)
• The paper size that can be used in this mode is limited to 11" ✕
17", 8 1/2" ✕ 14" and 8 1/2" ✕ 11R".
(Metric specifications)
• The paper size that can be used in this mode is limited to A3,
B4 and A4R.
a
1 1 1 1 1 Finish: Right
The order of copying will be performed so that the stacked and
folded pages of the finished copies will read from right to left.
2 2 2 2 2 Finish: Left
The order of copying will be performed so that the stacked and
folded pages of the finished copies will read from left to right.
1
2
3
4
5
6
7
8
3 3 3 3 3 If stitch/cover is set:
Whether copying onto the front cover and the back cover or not
can be set respectively.
Blank
Front copy
Back copy
2 sided copy
5-16
b
1
7 2
5 4
2
7
2
5
4
Front cover Rear cover
NOTE
• Covers marked with are copied.
• The illustrations above show the case with binding on the left.
Set the originals in the Document Processor.
1
IMPORTANT
• When the originals are set on the platen, set the first original.
Touch the [Function] key.
2
The Function screen will appear.
Inch specifications
Metric specifications
Touch the [Booklet] key.
3
The "Booklet" screen will appear.
Inch specifications
Metric specifications