Kyocera KM-2530 Operation Manual page 27

Inch specifications
6
Metric specifications
6
6. Copy quality selection
Copy quality is selected according to the original. Touch the [User
choice] key and [Orig image quality] key to open the "Orig. image
quality" screen.
Inch specifications
Metric specifications
Text+Photo mode:
Touch the [Text+Photo] key to highlight it. Set this mode to copy
originals with mixed text and photo.
Photo mode:
Touch the [Photo] key to highlight it. With this mode, a dimentional
effect of photo is added.
Text mode:
Touch the [Text] key to highlight it. With this mode, pencil and fine
lines are clearly copied.
NOTE
• The default copy quality mode used in the initial mode can be
selected. (See "Exposure mode" on page 6-25.)
• The copy exposure can be adjusted in all copy quality modes.
(See "Manual exposure adjustment (Mixed)" on page 6-30, and
"Manual exposure adjustment (Text)" and "Manual exposure ad-
justment (Photo)" on page 6-31.)
CHAPTER 4 BASIC OPERATION
Inch specifications
7
Metric specifications
7
7. Setting the number of copies
Use the numeric keys to enter the desired number of copies on
the message display. Up to 999 copies can be set.
NOTE
• It is possible to lower the limit on the number of copies that can
be set at a time. (See "Preset limit" on page 6-33.)
1 2
8
4 5
7 8
0
8. Starting copying
Press the [Start] key. If the Start indicator is lit green and "Ready
to copy." is displayed on the message display, copying is pos-
sible.
3
Reset
6
Stop/
Clear
9
Start
4-3