Kyocera KM-2530 Operation Manual page 91

•
Auto shut-off time
Select the length of time that you want to elapse - when the copier
is not used -before the auto shut-off function automatically turns
the power to the copier OFF.
1
Display the "Machine default" screen. (See (2) Access-
ing the machine default setting mode.)
Inch specifications
Metric specifications
Select "Auto shut-off time" in the setting item list at the
2
left-hand side of the screen, and then touch the [Change
#] key.
The "Auto shut-off time" screen will appear.
Inch specifications
Metric specifications
3
Touch the [+] key or [–] key to select auto shut-off time
after done copying or last settings.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the "Machine default" screen.
4 Touch the [Close] key.
The display will return to the "Machine default" screen.
Touch the [Close] key.
5
The display will return to the "Default setting menu"
screen.
CHAPTER 6 COPIER MANAGEMENT
•
Auto preheat time
Select the length of time that you want to elapse – after copying
ends – before the energy-saving auto preheat function is engaged.
1 Display the "Machine default" screen. (See (2) Access-
ing the machine default setting mode.)
Inch specifications
Metric specifications
Select "Auto preheat time" in the setting item list at the
2
left-hand side of the screen, and then touch the [Change
#] key.
The "Auto preheat time" screen will appear.
Inch specifications
Metric specifications
3 Touch the [+] key or [–] key to select auto preheat time
after done copying or last settings.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the "Machine default" screen.
4 Touch the [Close] key.
The display will return to the "Machine default" screen.
5 Touch the [Close] key.
The display will return to the "Default setting menu"
screen.
6-17