Print Form - Kyocera KM-2530 Operation Manual

3. Print Form

Output the counter report by following the steps as shown.
Report Contents
<Copy Report>
Outputs the list of the default values selected in the Copy Default
Setting.
<Machine Report>
Outputs the list of the default values selected in the Machine
Default Setting.
<Counter Report>
Outputs the average copy density (black ratio (%) ) for each print
size of the copy, printer or FAX function.
NOTE
• Make sure 11" ✕ 8 1/2" or A4 size paper is set in the drawer. If
not, set it. When the wrong paper is set, the paper selection
screen will appear before the start of copy.
1
Press the [ ] (Default setting) key on the control panel.
Selection
1
4
7
2 The "Default setting menu" screen will appear.
Inch specifications
Metric specifications
Management Interrupt En
2 3
Reset
5 6
Stop/
Clear
8 9
CHAPTER 6 COPIER MANAGEMENT
3
Touch the [Print form] key.
The "Enter the administrator number" screen will appear.
Inch specifications
Metric specifications
Enter the 4-digit management pin code "
4
the numeric keys. "2500" for Copiers with a copy speed
of 25 copies per minute, "3500" for Copiers with a copy
speed of 35 copies per minute or "4000" for Copiers with
a copy speed of 40 copies per minute is set at the ship-
ment.
The "Print report menu" screen will appear.
Inch specifications
Metric specifications
NOTE
• The 4-digit management pin code can be changed. (See "Man-
agement code change" on page 6-21.)
" with
6-35