Cautions; Removal Procedures - Kyocera KM-2530 Operation Manual

CHAPTER 8 WHEN A PROBLEM OCCURS

(1) Cautions

WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is a
danger of electrical shock.
CAUTION
The copier's fixing unit is extremely hot. Take sufficient
care when working in this area, as there is a danger of
getting burned.
• Do not reuse misfed paper.
• If paper is torn during removal, be sure to remove all loose scraps
from inside the copier, or they could cause misfeed later.
• After misfed paper has been removed, warm-up will begin. The
Misfeed indicator will turn off and the copier will return to the
same settings prior to the misfeed.

(2) Removal procedures

1 1 1 1 1 Misfeed in paper feed section
•
Misfeed in drawer (JAM 10 to 13, 15 to 17)
If the message below appears, a misfeed has occurred in the
drawer (or optional paper feeder). Remove the misfed paper us-
ing the procedure given below.
Inch specifications
Metric specifications
Open the drawer.
1
8-4
2
Remove the misfed paper while taking care not to tear it.
* If the paper should be torn, remove all the scraps from
the inside the copier.
3 Close the drawer slowly.
* Check that the paper is kept under the claws of the
drawer. If not, reload the paper.
•
Misfeed in left cover 1 (JAM 30 to 34, 36 to 52, 60, 61)
If the message below appears, a misfeed has occurred in the left
cover 1. Remove the misfed paper using the procedure given
below.
Inch specifications
Metric specifications
Pull up the lock lever to open the left cover 1.
1