Table of Contents
Advertisement
Power Management
Figure 40. Power Management
Table 25. Power Management
Parameter
Enable Hibernation
ACPI Sleep State
Restore AC after power loss
RTC Wake system from S5
36
BIOS Setup
Settings
Disabled, Enabled
Suspend Disabled, S3
(Suspend to RAM)
Power on, Power off
Disabled, Fixed Time,
Dynamic Time
Description
Enables or disables system ability to hibernate (OS/S4 Sleep
State). This option may not be effective with some operating
systems.
Select the highest ACPI sleep state the system will enter
when the SUSPEND button is pressed.
Specify what state to go to when power is re-applied after a
power failure (G3 state).
Enable or disable, system wake on alarm event. Select
FixedTime, system will wake on the hr::min::sec specified.
Select DynamicTime, system will wake on the current time +
Increase minute(s).
Advertisement
Table of Contents
