Lubrication Points - Epson TM U200D - B/W Dot-matrix Printer Technical Manual

Lubrication Points

The following table describes the lubrication points, type, and class. The numbers in the
following table correspond to the numbers in the lubrication and adhesive points diagrams in
the Appendix on pages A-20 and A-21.
Lubrication points
No.
Contact points between the Shaft, carriage and
(1)
Carriage sub-ass'y (2 points)
(2) Shaft, ribbon intermediate gear
(3) Shaft, paper hold roller
(4) Both ends of the guide roller
(5) Switching points of Lever, ribbon switch
(6) Switching point of Lever, ribbon release
Tool List
The required tools for this printer are as follows:
Brush #1
Cleaning brush
Phillips screwdriver No. 1
Phillips screwdriver No. 2
Phillips screwdriver No. 2 (with long handle)
Flatblade head screwdriver.
Pliers
Retaining pliers #2.3
Thickness gauge (0.55mm, 0.60mm, 0.65mm)
Tweezers
Slanted blade cutter
Electric soldering iron.
3-10 Handling and Maintenance
Lubrication point Lubricant type
O-10
G-31
G-31
G-31
G-31
G-31
Rev.B