Sub-assembly A
Frame, paper feed unit ass'y
1. Apply G-31 to the middle of the Shaft, Roller, paper hold.
2. Pass the Shaft, Roller, paper hold through the Spring, paper hold plate and Roller, paper hold.
3. Hold the Roller, paper feed ass'y at the angle shown in the illustration and insert the thin end of the
shaft into the Frame, paper feed ass'y. Then move the Roller, paper feed ass'y into place.
Rev.B
Shaft, Roller, paper hold
Apply G-31
Roller, paper hold
Roller, paper feed ass'y
TM-U200D/U200PD Technical Manual
Spring, paper hold plate
Frame, paper feed ass'y
Disassembly, Assembly, and Adjustment 5-3
thin
portion