Main Assembly 7 (Case Unit); Paper Roll Receive Rollers, Case, Upper, Roller, Guide And Switch Panel - Epson TM U200D - B/W Dot-matrix Printer Technical Manual

2. In case of Single-color Print Version, secure the grounding wires from the printer mechanism
assembly to the Plate, upper with the screw. Make sure that the grounding wires are lower than the
end of the Shaft, carriage guide.
3. In case of 2-color Print Version, secure the Earth plates from the printer mechanism assembly with the
screws.
CP(0) (M3x6)
[0.59 to 0.78 N • m
(6 to 8 kgf • cm)]
Grounding wire
Shaft, carriage
guide
(Single-color Print Version)

Main Assembly 7 (Case Unit)

Paper roll receive rollers , Case, upper , Roller, guide and Switch panel
1. Apply G-31 to both of the Paper roll receive rollers.
2. Attach the Paper roll receive rollers to the Case, lower.
3. Attach the Case, upper to the Case, lower and secure it with the screws. Make sure not to catch the
grounding wires on the Case, upper.
4. Attach the Roller, guide to the Case, upper.
Rev.B
CP(0) (M3x6)
[0.59 to 0.78 N • m
(6 to 8 kgf • cm)]
Grounding wires
Earth plate
(2-color Print Version)
TM-U200D/U200PD Technical Manual
Disassembly, Assembly, and Adjustment 5-35