(*1)
This dimension shows the distance from the manual cutter to the printing position.
(*2)
The values shown for the printing area are the values calculated (between dot centers) according to the wire
diameter (0.29 mm [.011
Paper Roll Supply Device
Supply device:
Receive Buffer
Either 1 KB or 40 bytes selectable by DIP switches.
1-6 Features and General Specifications
63.34 mm (2.49")
5.9 mm (0.23")
Maximum of 200 dots, 400 positions
76 mm (2.99")
Figure 1-4 Printing area
"
]).
Drop-in loading
Cutting position (manual cutter)
20.2 mm (0.79") (*1)
(*2)
6.76 mm (0.27")
Rev.B