7. Attach the Motor, paper feed to the Frame, paper feed ass'y with the screw.
8. By fitting the U-cut portion of the Paper guide, upper to the shaft of the Roller, paper feed ass'y,
attach the Paper guide to the Frame, paper feed ass'y. Press the Paper guide until it clicks.
Check that the two dowels on the Frame, paper feed are in the rectangular holes on the Paper guide,
upper.
Rev.B
CBS-tite (M3x5)
[0.69 to 0.88 N • m
(7 to 9 kgf • cm)]
Rectangular
holes
Paper guide, upper
TM-U200D/U200PD Technical Manual
Motor, paper feed
Frame, paper feed
ass'y
Dowels
shaft on the Roller, paper
feed ass'y
U-cut portion
Disassembly, Assembly, and Adjustment 5-5