3. Attach the screws.
Check that the Spring, paper hold plate is not caught on the Frame, base ass'y.
Main Assembly 4
Motor, carriage ass'y
1. Fit the A corners of the Motor, carriage ass'y under the B corners of the Frame, base ass'y. Then slide
the Motor, carriage ass'y in the direction of the arrow to fit the other two corners of the Motor,
carriage ass'y under the tabs of the Frame, base ass'y.
Rev.B
CBT-B(M3x10)
[0.49 to 0.69 N • m
(5 to 7 kgf • cm)]
Portion A
Plate spring, paper hold
Frame, base ass'y
A corners
B corners
Frame, base ass'y
TM-U200D/U200PD Technical Manual
Frame, paper feed ass'y
Rectangular hole
CBT-B(M3x10)
Portion A
[0.49 to 0.69 N • m
(5 to 7 kgf • cm)]
Tab
Portion B
Motor, carriage ass'y
Tabs position
Disassembly, Assembly, and Adjustment 5-11