5. Position the lead wires of Paper detection switch sub-ass'y as shown in the illustrations, and make
sure that the lead wires are as close as possible to the Frame, base surface.
Main Assembly 11
Radiating plate,, carriage motor
Radiating plate, carriage motor
1. Attach the
the direction of the arrow until it stops.
Check that the
are the same height. If not, adjust the Radiating plate, carriage motor to make the surfaces the same
height. Check that the motor's cables are not caught on the heat sink
Rev.B
Lead wires of Paper detection switch sub-ass'y
Radiating plate, carriage motor
Surface B
Motor's cables
(Single-color Print Version)
TM-U200D/U200PD Technical Manual
Lead wires of Detector sub-ass'y
to the Motor, carriage ass'y, and turn the heat sink in
surface B and surface A of the Frame, paper feed
Motor, carriage
heat sink
Surface A
Motor, carriage
ass'y
Disassembly, Assembly, and Adjustment 5-17
.
Frame, paper feed