2. Place the FPC, print head under the hooks on the Carriage sub-ass'y, and then secure the Print head
unit to the Carriage sub-ass'y with the screw.
3. Place the FPC, print head under the hooks on the Carriage sub-ass'y, and then secure the Print head
unit to the Carriage sub-ass'y with the screw.
Make sure that there is a space between the slanting edge of the FPC, print head and the Carriage sub-
ass'y slanting side, and between the FPC edge and portion A. If there is no space, the FPC, print head
may not be inserted into the Print head unit firmly. Remove the print head unit and insert the FPC,
print head again.
5-22 Disassembly, Assembly, and Adjustment
Print head unit
FPC, print head
Hooks
(2-color Print Version)
(2-color Print Version)
CPP-tite (M3x10)
[0.49 to 0.69 N • m
(5 to 7 kgf • cm)]
Carriage sub-ass'y
O-10 apply portions
There must be space
Rev. B