D-Link DES-3010PA User Guide
Modifying QoS Interface Settings
The QoS Interface Page allows network managers to modify the QoS settings assigned to a specific interface. To
set the QoS interface settings:
1.
Click System > QoS > General Settings > Interface Settings. The QoS Interface Page opens.
Figure 122:QoS Interface Page
The QoS Interface Page contains the following fields:
•
Interface — The port or LAG for which the default CoS policy is defined.
•
Trust Mode — Indicates whether or not Trust Mode is enabled on the interface. The possible field values are:
–
Not enabled — Trust mode is not enabled on the interface.
–
Enabled — Trust mode is enabled on the interface.
•
Default CoS for Incoming Traffic — The default CoS value for incoming packets for which a VLAN tag is not
defined. The possible field values are 0-7. The default CoS is 0.
2.
Click
. The Edit Interface Settings Page opens:
Page 192