D-Link DES-3010PA User Guide
LED Definitions
The device front panels contain Light Emitting Diodes (LED) that indicate the device status. The different LED
types are as follows:
•
Port LEDs — Indicate each port status.
•
System LEDs — Indicating the device power supply status.
Port LEDs
10/100Base-TX Fast Ethernet RJ-45 Port LEDs
The following figure illustrates the port LEDs.
Figure 4:
10/100Base-TX Fast Ethernet RJ-45 Port LEDs
Each RJ-45 ports has 4 LEDs, one for speed, one for Link /Activity and two for PoE. The LED indications are
described in the following table:
Table 3:
10/100Base-TX Fast Ethernet RJ-45 Port LED Indications
Por t Des criptio n
10/100M
Link/Activity LED
Power OK
Power Fail
L ED In dica tio n
D escr ip tio n
Green
A 100 Mbps link is established on the port.
A 10 Mbps link is established on the port or no link is estab-
Off
lished on the port.
Green
A link is established on the port.
Flashing Green
There is data transmission on the port.
Off
No link is established on the port.
Green
PoE power supply is functioning.
Red
PoE power supply is not functioning.
Page 14