Notes
•
All DNS servers can be selected by clicking Select All in DNS Server Table.
2.
Select Enable DNS.
3.
Define the Default Domain Name and Active Server fields.
4.
Click
. The DNS server is enabled, and the device is updated.
To add a new DNS Server:
1.
Click Basic Setup > IP Configuration > Domain Name System > DNS Server. The DNS Server Page
opens.
2.
Click
. The Add DNS Server Page opens:
Figure 81: Add DNS Server Page
3.
Define the DNS Server, DNS Server Currently Active, and Set DNS Server Active fields.
4.
Click
. The DNS server is added, and the device is updated.
Page 135
Configuring IP Information
Configuring Domain Name Servers