Defining Snmp Views - D-Link DES-3010PA - Switch Web User Manual

D-Link DES-3010PA User Guide

Defining SNMP Views

SNMP views provide or block access to device features or portions of features. For example, a view can be
defined which provides that SNMP group A has Read Only (R/O) access to Multicast groups, while SNMP group B
has Read-Write (R/W) access to Multicast groups. Feature access is granted via the MIB name or MIB Object ID.
To define SNMP views:
1. Click System > SNMP > Security > Views. The SNMP Security Views Page opens:
Figure 103:SNMP Security Views Page
The SNMP Security Views Page contains the following fields:
•
View Name — Displays the user-defined views. The view name can contain a maximum of 30 alphanumeric
characters.
•
Object ID Subtree — Displays the device feature OID included in or excluded from the selected SNMP view.
•
View Type — Indicates whether the defined OID branch will be included in or excluded from the selected
SNMP view.
•
Remove — Deletes the currently selected view. The possible field values are:
–
Checked — Removes the selected view.
–
Unchecked — Maintains the list of views.
2. Click . The Add SNMP View Page opens:
Page 168