Defining Static Forwarding Database Entries - D-Link DES-3010PA - Switch Web User Manual

Defining Static Forwarding Database Entries

The Forwarding Database Static Addresses Page contains parameters for defining the age interval on the device.
To prevent static MAC addresses from being deleted when the device is reset, ensure that the port attached to the
MAC address is locked.
To configure the static forwarding database:
1. Click Advanced Setup > Forwarding Database > Static Addresses. The Forwarding Database Static
Addresses Page opens.
Figure 84: Forwarding Database Static Addresses Page
The Forwarding Database Static Addresses Page contains the following fields:
•
MAC Address — Displays the MAC address to which the entry refers.
•
VLAN ID — Displays the VLAN ID number to which the entry refers.
•
Interface — Displays the interface to which the entry refers:
–
Port — The specific port number to which the forwarding database parameters refer.
–
LAG — The specific LAG number to which the forwarding database parameters refer.
•
Status — Displays how the entry was created. The possible field values are:
–
Secure — The MAC Address is defined for locked ports.
–
Permanent — The MAC address is permanent.
–
Delete on Reset — The MAC address is deleted when the device is reset.
–
Delete on Timeout — The MAC address is deleted when a timeout occurs.
Defining the Forwarding Database
Defining Static Forwarding Database Entries
Page 139