Configuring An Initial Https Password - D-Link DES-3010PA - Switch Web User Manual

D-Link DES-3010PA User Guide
console(config)# ip http authentication local
console(config)# username admin password user1 level 15

Configuring an initial HTTPS Password

To configure an initial HTTPS password, enter the following commands:
console(config)# ip https authentication local
console(config)# username admin password user1 level 15
Enter the following commands when configuring to use a console, a Telnet, or an SSH session to use an HTTPS
session.
In the Web browser, enable SSL 2.0 or greater for the content of the page to appear.
console(config)# crypto certificate generate key_generate
console(config)# ip https server
When initially enabling an http or https session, enter admin for user name and user1 for password.
Note
HTTP and HTTPS services require level 15 access and connect directly to the configuration level access.
Page 40