D-Link DES-3010PA - Switch Web User Manual page 133

D-Link DES-3010PA User Guide
•
IP Address — Indicates the station IP address, which is associated with the MAC address filled in below.
•
MAC Address — Displays the station MAC address, which is associated in the ARP table with the IP
address.
•
Status — Displays the ARP table entry type. Possible field values are:
–
Dynamic — The ARP entry is learned dynamically.
–
Static — The ARP entry is a static entry.
•
Remove — Removes a specific ARP entry. The possible field values are:
–
Checked — Removes the selected ARP entries.
–
Unchecked — Maintains the current ARP entries.
2. Define the ARP Entry Age Out and Clear ARP Table Entries fields.
3. Click . The ARP parameters are defined, and the device is updated.
To create a new ARP entry:
1. Click Basic Setup > IP Configuration > IP Addressing > ARP. The ARP Page opens.
2. Click . The Add ARP Entry Page opens:
Figure 79: Add ARP Entry Page
3. Define the Interface, IP Address, and MAC Address fields.
4. Click . The ARP interface is added, and the device is updated.
Page 132