Table of Contents
Advertisement
D-Link DES-3010PA Back Panel
The following figure illustrates the D-Link DES-3010 PA back panel.
Figure 2:
D-Link DES-3010PA Back Panel
The D-Link DES-3010PA back panel is configured as follows.
•
RPS Connector — Redundant Power Supply (RPS) DC interface.
•
Power Connector — AC power supply interface.
Ports Description
This section describes the device ports and includes the following topics:
•
10/100Base-TX Fast Ethernet Ports
•
1000Base-T Gigabit Ethernet Ports
•
SFP Port
•
DB-9 Console Port
10/100Base-TX Fast Ethernet Ports
The 10/100Base-TX Fast Ethernet ports are RJ-45.
1000Base-T Gigabit Ethernet Ports
The device contains a 1000 Base-TX Gigabit port. The port is an RJ-45 port which supports half- and full-duplex
mode 10/100/1000 Mbps.
SFP Port
Small Form Factor Pluggable (SFP) Optical Transceivers are integrated duplex data GBIC links for bi-directional
communication over multimode optical fiber, designed for high-speed Fiber Channel data links. The SFP port is
designated as 1000Base-X.
The SFP (GBIC) port can be removed and inserted as required. The following figure illustrates the GBIC insertion.
Page 11
Device Description
Ports Description
Hide quick links:
Advertisement
Table of Contents
