Table of Contents
Advertisement
D-Link DES-3010PA User Guide
•
Oversize Packets — Displays the number of oversized packets (over 1518 octets) received on the interface
since the device was last refreshed.
•
Fragments — Displays the number of fragments (packets with less than 64 octets, excluding framing bits, but
including FCS octets) received on the interface since the device was last refreshed.
•
Jabbers — Displays the total number of received packets that were longer than 1518 octets. This number
excludes frame bits, but includes FCS octets that had either a bad Frame Check Sequence (FCS) with an inte-
gral number of octets (FCS Error) or a bad FCS with a non-integral octet (Alignment Error) number. The field
range to detect jabbers is between 20 ms and 150 ms.
•
Collisions — Displays the number of collisions received on the interface since the device was last refreshed.
•
Utilization — Displays the percentage of the interface utilized.
2.
Select an entry in the History Entry field. The Statistics are displayed.
Page 246
Hide quick links:
Advertisement
Table of Contents
