Defining Sntp Interface Settings - D-Link DES-3010PA - Switch Web User Manual

Defining SNTP Interface Settings

The SNTP Interface Settings Page contains fields for setting SNTP on different interfaces. To define SNTP inter-
face settings:
1. Click System > SNTP > Interface Settings. The SNTP Interface Settings Page opens:
Figure 146: SNTP Interface Settings Page
The SNTP Interface Settings Page contains the following fields:
•
Interface — Indicates the interface on which SNTP can be enabled. The possible field values are:
–
Port — Indicates the specific port number on which SNTP is enabled.
–
LAG — Indicates the specific LAG number on which SNTP is enabled.
–
VLAN — Indicates the specific VLAN number on which SNTP is enabled.
•
Receive Servers Updates — Enables the server to receive or not receive updates.
•
Remove — Removes SNTP interfaces.
–
Checked — Removes the selected SNTP interface.
–
Unchecked — Maintains the selected SNTP interfaces.
2. Click . The Add SNTP Interface Page opens.
Page 229
Configuring System Time
Defining SNTP Interface Settings