Table of Contents
Advertisement
•
Action — The action to be applied to packets arriving on a locked port. The possible field values are:
–
Forward — Forwards packets from an unknown source without learning the MAC address.
–
Discard — Discards packets from any unlearned source. This is the default value.
–
Shutdown — Discards packets from any unlearned source and shuts down the port. The port remains
shut down until reactivated, or until the device is reset.
•
Trap — Enables traps when a packet is received on a locked port. The possible field values are:
–
Checked — Enables traps.
–
Unchecked — Disables traps.
•
Trap Frequency (Sec) — The amount of time (in seconds) between traps. The default value is 10 seconds.
2.
Click
. The Port Security Settings Page opens:
Figure 50: Port Security Settings Page
3.
Modify the Interface, Lock Interface, Action on Violation, Enable Trap, Port Status, and Trap Frequency fields.
4.
Click
. The port security settings are defined, and the device is updated.
Page 99
Configuring Device Security
Configuring Network Security
Hide quick links:
Advertisement
Table of Contents
