3.
Define the Host IP Address, Priority, Source IP Address, Key String, Authentication Port, Timeout for Reply,
and Single Connection.
4.
Click
. The TACACS+ server is defined, and the device is updated.
To edit a TACACS+ server settings:
1.
Click System > Management Security >Authentication > TACACS+. The TACACS+ Page opens.
2.
Select TACACS+ server entry.
3.
Click
. The Add TACACS+ Host Page opens.
Figure 150: TACACS+ Host Settings Page
4.
Define the fields.
5.
Click
. The TACACS+ host settings are saved, and the device is updated.
Defining TACACS+ Authentication
Page 233