D-Link DES-3010PA - Switch Web User Manual page 185

D-Link DES-3010PA User Guide
SNMPv1,2c Notification Recipient
The SNMPv1,2 cNotification Recipient table contains the following fields:
•
Recipients IP — Displays the IP address to which the traps are sent.
•
Notification Type — Displays the notification sent. The possible field values are:
–
Trap — Indicates traps are sent.
–
Inform — Indicates informs are sent.
•
Community String — Displays the community string of the trap manager.
•
Notification Version — Displays the trap type. The possible field values are:
–
SNMP V1 — Indicates that SNMP Version 1 traps are sent.
–
SNMP V2c — Indicates that SNMP Version 2 traps are sent.
•
UDP Port — Displays the UDP port used to send notifications. The default is 162.
•
Filter Name — Indicates if the SNMP filter for which the SNMP Notification filter is defined.
•
Timeout — Indicates the amount of time (in seconds) the device waits before re-sending informs. The default
is 15 seconds.
•
Retries — Indicates the amount of times the device re-sends an inform request. The default is 3 seconds.
•
Remove — Deletes the currently selected recipient. The possible field values are:
–
Checked — Removes the selected recipient from the list of recipients.
–
Unchecked — Maintains the list of recipients.
Page 184