Defining Dns Servers - D-Link DES-3010PA - Switch Web User Manual

D-Link DES-3010PA User Guide

Defining DNS Servers

The DNS Server Page contains fields for enabling and activating specific DNS servers. To enable a DNS server:
1. Click Basic Setup > IP Configuration > Domain Name System > DNS Server. The DNS Server Page
opens:
Figure 80: DNS Server Page
The DNS Server Page contains the following fields:
•
Enable DNS — Enables translating the DNS names into IP addresses. The possible field values are:
–
Enable — Translates the domains into IP addresses.
–
Disable — Disables translating domains into IP addresses.
•
Default Domain Name — Specifies the user-defined DNS server name.
•
Type — Displays the IP address type. The possible field values are:
–
Dynamic — The IP address is dynamically created.
–
Static — The IP address is a static IP address.
•
Remove — Removes DNS servers. The possible field values are:
–
Checked — Removes the selected DNS server
–
Unchecked — Maintains the current DNS server list.
•
DNS Server — Displays the DNS server D-Link IP address. DNS servers are added in the Add DNS Server
Page.
•
Active Server— Specifies the DNS server that is currently active.
Page 134