Epson H6000IIP - TM Two-color Thermal Line User Manual page 92

Version 2.65 Jul. 2009
of trace.
To avoid this problem, use the "Private Trace" option for the device to
trace.
When CCO is registered, the device that can be traced is limited. Even
when [Global Trace] is selected, only the device that can be traced is
traced.
.
"Use specific trace log file" check box
Select this check box when using a specific trace log file.
When selected, it is possible to change the trace log file name. When
cleared, the trace log file name is automatically set.
If the name of log file is set the same name as the other log file (even
error log file of POSPrinter), log information of the following device don't
be recorded. To avoid this problem, please don't use the same name as
the other log file.
If a special trace log file is specified, please be careful of the access
privileges for both the specified file, and for the save location.
If there is an insufficient access privilege for the specified location, the
trace log file will not be created.
" Notify when trace log file becomes full. " check box
In order to receive notification when the trace log file has exceeded the
maximum size limit, check this checkbox. The ability to change the trace
log file name depends on whether this checkbox is checked.
[OK] button
Close the dialog box and save the current settings.
[Cancel] button
Use this button to cancel the setting and close the dialog box.
[Help] button
Use this button to display the help on the dialog box by clicking this
button.
iv. Message Handling
87
User's Manual
Installer, SetupPOS, TMUSB