Epson H6000IIP - TM Two-color Thermal Line User Manual page 44

The [Cancel] button works at this point, but do not press the [Cancel]
button unless there is a particular reason. Operation after pressing the
[Cancel] button is not guaranteed. If pressed, be sure to perform a
reinstallation.
(10) When all the operations are completed, the "Setup Complete" dialog box is
displayed.
Select in the check box whether or not to display the release note on the
installed EPSON OPOS ADK. It is strongly recommended to read the
notes.
When the installation of the parallel driver is successfully done, system
files are renewed and a message to query rebooting method is indicated.
Please specify whether rebooting right away or later, and execute the
rebooting. If later rebooting is specified, make sure to reboot after the
completion of the installation. The operation under the un-rebooted
environment is not guaranteed at all.
(11) Installation is completed. The SetupPOS utility starts up. Confirm the
settings in accordance with the setup described in "Section 5. SetupPOS
Utility" of this manual.
When system rebooting is executed, SetupPOS utility does not start
automatically. Please start SetupPOS utility from start menu.
3.3.2.5. Others
When both Version 1.xx and Version 2.xx prior to Version 2.60 are already
installed and in addition, Version 2.xx is upgraded to Version 2.xx, the method
described in Section 3. "3.3.2.2. Overwriting Version 2.xx prior to Version 2.60 by
Version 2.60" of this manual applies.
39
User's Manual
Installer, SetupPOS, TMUSB
Version 2.65 Jul. 2009