Version 2.65 Jul. 2009
5.3.1.4. Communication Settings Screen (for network or wireless device)
In this screen, set a port to connect as well as its details.
This screen appears if the network or wireless device is selected in the add
device screen.
"IP address/Host name" edit box
Use the edit field to specify a network or a wireless device's IP address or host
name.
If an IP address or host name is already set up, the address or name appears in
the edit field.
The network settings set the input value by pushing the [Update] button.
If the device that has been set is on the port to be set, depending on the
capability of the device and selected device, a message not to set the device to
the port appears. In this case, the port setting is invalid.
[Update] button
Use this button to save the entered IP address or host name to the registry.
If a device already exists at the IP address or host name entered into the edit field,
then a message appears and the change is not accepted.
116
User's Manual
Installer, SetupPOS, TMUSB