Using The Usb Autosetup Wizard - Epson H6000IIP - TM Two-color Thermal Line User Manual

5.3.2. Using the USB AutoSetup Wizard

In the communication settings screen, if the [Auto Setting] button is selected, then
a message appears.
If the [OK] button is selected, then the "USB AutoSetup" wizard starts and
searches an appropriate USB port number to the selected devices.
5.3.2.1. Screen for the User to Select a Model
This screen appears if it is possible that the selected device is a slave device with
Hydra connection (specifically, a device other than POSPrinter).
"Master Device" combo box (POSPrinter)
Use this combo box to select the master device of a device to be searched.
[Browse] button
Use this button to open the file open common dialog box and select a master
device's INF file from a location other than the specified folder.
[OK] button
Use this button to start searching for the USB port number according to the
information of the selected master device.
[Cancel] button
Use this button to cancel the operation, then return to the device communication
settings wizard of the "Add New Device" wizard or the "Communication settings"
dialog box.
When the search is complete, one of the screens from (1) to (3) appears.
(1) If only one search target device is found:
"The number has been searched below." edit field
A port number in the search result appears.
[OK] button
Use this button to end the "USB AutoSetup" wizard, and set the port number
(found in the search) to "USB Port Setting" of the communication setting.
[Search] button
Use this button to search the port number again.
[Cancel] button
Use this button to cancel the operation, then return to the device
communication settings wizard of the "Add New Device" wizard or
the "Communication settings" dialog box.
(2) If multiple search target devices are found:
121
User's Manual
Installer, SetupPOS, TMUSB
Version 2.65 Jul. 2009